How to Make the Easiest Ever Big Hair Bow

Big hair bows are all the rage with young girls and ‘tweens. This bow is so easy to make, you’ll soon have a whole wardrobe of the easiest ever big hair bows.How to Make the Easiest Ever Big Hair Bow

Supplies for the Easiest Ever Big Hair Bowhair bow maker kit

Instructions for Making the Easiest Ever Big Hair Bow

  1. Fold the ends of the wide ribbon at a 45° angle.Fold Ribbon End 45 Degrees - make a bow with ribbon
  2. Crease the ribbon on the fold to mark your cutting line.Crease Ribbon to Mark Cut Line - bow maker ribbons
  3. The cuts should be parallel, so when the ribbon is folded in half they look like this. Quickly pass the ribbon ends through a flame to seal.Cut Ribbon Ends - best ribbon for hair bows
  4. Cut four  6″ x ½” strips of HTV to trim the ends of the ribbon. Cut one 5″ x 5/8″ strip of HTV for narrow ribbon.Cut HTV Strips - ribbon bow instructions
  5. Press the HTV in place using either a heat press or home iron. See notes below for using a home iron.
  6. Fold the bow wire in half and put in the Bowdabra. Tuck the ends of the wire under the Bowdabra to keep them out of the way.mini bowdabra bow maker kit
  7. Fold one of the lengths of wide ribbon in half so the HTV decorated sides are up.Ribbon Ends with HTV - wide ribbon bow
  8. At about 1½” above the HTV on the outer edge, pleat the ribbon.Pleat Ribbon - diy ribbon hair bow
  9. Place the folded, pleated ribbon in the Bowdabra.
  10. 9 Repeat Steps 7 and 8 for the second length of ribbon.
  11. Place the second folded pleated ribbon in the Bowdabra. Try to get the two ribbon lengths beside each other as much as possible (as opposed to on top of one another).Bowdabra Ribbons - bow making tool
  12. Compress the ribbons with the Bowdabra wand.
  13. With the ribbons still in the Bowdabra, pass the wire ends through the loop and tighten.Pass Wire Ends through Loop - bow making tools

Finishing your bow

  1. Tie a secure knot. Remove the bow from the Bowdabra, bring the wire ends to the back side of the bow, and tie a second knot. Leave the wire ends long, and fold toward the bottom of the bow.Tie Secure Knot - best hair bow making tool
  2. Wrap the 5/8″ ribbon around the center of the bow, and use hot glue or strong liquid adhesive to secure in place. Add any optional bling. Use the wire ends to tie an elastic hair tie in place.how to make big hair bows
Bowdabra's easy-to-create bow-makers are available at the Bowdabra website's online store and also at various retail establishments such as Amazon, AC Moore, Pat Catan's Stores, Jo Ann store, Michael's, and Walmart.

Leave a Reply

2505 Anthem Village Drive, Suite E450, Henderson, NV 89052

Email Us

Wildcard SSL Certificates - Bowdabra DIY Tools
Bowdabra Offer - Easy Hair Bows Making Tools