Archives

Create DIY Spring Bow Wreath With Bowdabra: Step By Step Guide

Bring Color and Cheer to Your Front Door by adding a perfect DIY Spring Bow Wreath now! Don’t know how to create it? Watch Nick from Nick’s Seasonal Décor on Bowdabra Facebook Live, with funky and traditional bows, and a spring wreath, teaching us the process from scratch. Tune in to learn just how to make these gorgeous bows that you can add to your Wreaths or any décor!

Traditional Bow (Starts at 1:54)

Materials required:

  • 100-yard Bowdabra bow wire
  • Large Bowdabra
  • Watermelon Fuchsia-Green ribbon roll

 

Traditional Bow

Traditional Bow

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the Watermelon Fuchsia-Green ribbon roll, he places them right into the Bowdabra.
  3. He creates 9 loops on the Bowdabra to give it a traditional bow design.
  4. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

Funky Bow (Starts at 6:10)

Materials required:

  • 100-yard Bowdabra bow wire
  • Large Bowdabra
  • Watermelon Fuchsia-Green ribbon roll

 

Funky Bow

Funky Bow

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. He creates one loop with two tails on either end, cuts it off, and places it right into the Bowdabra.
  3. Using the same ribbon, he creates 5 more loops right into the Bowdabra.
  4. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

Watermelon Fuchsia-Green Ribbon Bow (Starts at 11:17)

Materials required:

  • 100-yard Bowdabra bow wire
  • Large Bowdabra
  • Watermelon Fuchsia-Green ribbon roll

 

Watermelon Fuchsia-Green ribbon Bow

Watermelon Fuchsia-Green Ribbon Bow

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. He creates 3 loops (4”) with the ribbon on either side of the Bowdabra.
  3. Using the same ribbon, he adds 2 loops (2½”) on either side of the Bowdabra and 1 button loop.
  4. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

DIY Spring Bow Wreath (Starts at 15:00)

Materials required:

  • 100-yard Bowdabra bow wire
  • Large Bowdabra
  • Yellow-white polka-dotted ribbon roll
  • Hot glue
  • 18” Grapevine wreath
  • Flower decorative picks

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the yellow-white polka-dotted ribbon roll, he places them right into the Bowdabra.
  3. He creates 4 loops on the Bowdabra and 1 button loop.
  4. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.
  5. In the end, he sticks the bow securely with hot glue to the wreath and adds some yellow flower and white hydrangea flower decorative picks.

 

Voila! You made a DIY Spring Bow Wreath!

 

Double Ribbon Bow (Starts at 21:17)

Materials required:

  • 100-yard Bowdabra bow wire
  • Large Bowdabra
  • Sky Gingham ribbon roll
  • Pink ribbon roll

 

Double ribbon Bow

Double Ribbon Bow

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the sky gingham and pink ribbon roll, he places them right into the Bowdabra.
  3. He creates 1 big loop with the pink ribbon, cuts it off, and places it right into the Bowdabra.
  4. Again he creates 1 loop with the pink ribbon on the Bowdabra.
  5. He adds 2 loops with the sky gingham ribbon. (In this fashion, he adds 2 loops at a time with different ribbons)
  6. Next, he creates 2 more loops with pink ribbon and 2 more loops with sky gingham ribbon on the Bowdabra.
  7. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

Mini Bow (Starts at 27:05)

Materials required:

  • 100-yard bow gold wire
  • Mini Bowdabra
  • Multicolored ribbon roll

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails (8”-10”) from the Multicolored ribbon roll, he places the tails right into the Bowdabra.
  3. Using the same ribbon, he adds 4 loops on the Bowdabra and 1 button loop.
  4. He brings the wire from one side to another to secure the bow and puts a slip knot.
  5. He finishes off by fluffing all the loops and cutting the dovetail pattern on all the tail ends.

 

Mini Hair Bow (Starts at 29:55)

Materials required:

  • 100-yard bow gold wire
  • Mini Bowdabra
  • Multicolored ribbon roll

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. Using the Multicolored ribbon, he places 6 loops on the Mini Bowdabra.
  3. He brings the wire from one side to another to secure the bow and puts a slip knot.
  4. He finishes off by fluffing all the loops and cutting the dovetail pattern on all the tail ends.

DIY spring wreath

 

 

Download FREE Bowdabra App

Leave a Reply

Your email address will not be published. Required fields are marked *

Bow Making Tools Payment Process
Bowdabra 100% Trusted Bow Maker Tools
Our Promise
to You
USPS Shipping - Bowdabra Bow Maker Tools
USPS Best Way
Shipping
Bowdabra Security - Best Bow Maker Tools & Bow Mega Kits
Secure
Information
By using our website, you consent to our use of cookies as described in our cookie policy. You can withdraw your consent at any time. Learn more