Archives

Create DIY Summer Wreath and bows with Bowdabra

It’s not summer until the summer wreaths hit the door! Add a pop of color and a bit of character to your front door with gorgeous summer bows and wreaths. No matter what design look you’re searching for, chances are you’ll find it here. We’ve assembled a brightly colored floral wreath and some beautiful bows. Learn how to create a DIY summer wreath and bows with Bowdabra in few minutes!

Watch Nick from Nick’s Seasonal Décor on Bowdabra Facebook Live, with funky and traditional bows, and a summer wreath, teaching us the process from scratch!

DIY Funky Bow (Starts at 2:06)

Materials required:

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the red and blue ribbon roll, he places them right into the Bowdabra.
  3. He creates one loop, two tails with the blue ribbon, cuts it off, and places it right into the Bowdabra.
  4. He creates one loop, two tails with the red ribbon, cuts it off, and places it right into the Bowdabra.
  5. In the same fashion, he creates more 2 loops with the red and blue ribbon alternatively.
  6. To secure the bow, he pulls the bow wire from one end to the other and makes slip knots.
  7. He finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

DIY Traditional Bow (Starts at 8:40)

Materials required:

 

DIY traditional bow

DIY Traditional Bow

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the blue gingham ribbon roll, he places them right into the Bowdabra.
  3. He creates 11 loops on the Bowdabra to give it a traditional bow design.
  4. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

DIY Chequered Ribbon Funky Bow (Starts at 12:37)

Materials required:

 

Funky Bow

DIY Chequered Ribbon Funky Bow

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. He takes the chequered ribbon and creates one loop with two tails on either end, cuts it off, and places it right into the Bowdabra.
  3. He places the red gingham ribbon roll on the Bowdabra, creates a loop, and cuts it off.
  4. Then, he takes the chequered ribbon and creates one loop with two tails on either end, cuts it off, and places it right into the Bowdabra.
  5. Using the red gingham ribbon, he creates one loop with two tails on either end, cuts it off, and places it right into the Bowdabra.
  6. In this way, he creates a total of 4 loops right into the Bowdabra.
  7. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

DIY Summer Wreath with a Funky Bow (Starts at 16:20)

Materials required:

 

DIY Summer Wreath

DIY Summer Wreath

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the red gingham ribbon roll, he places them right into the Bowdabra.
  3. He places the ribbon inside, creates 1 loop, cuts it off, and places it right into the Bowdabra.
  4. Again, he places the ribbon, creates a loop, and snips it off.
  5. He repeats the process 3 more times and creates a total of 5 loops.
  6. To secure the bow, he pulls the bow wire from one end to the other and makes slip knots.
  7. He finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.
  8. In the end, he sticks the bow securely with hot glue to the wreath and adds some red flower decorative picks and white roses too.

Voila! You made a beautiful DIY Summer wreath!

DIY Mini Bow (Starts at 25:17)

Materials required:

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the Red-white polka-dotted ribbon roll, he places the tails right into the Bowdabra.
  3. Using the same ribbon, he creates 4 loops on the Bowdabra and 1 button loop.
  4. To secure the bow, he brings the wire from one side to another and puts a slip knot.
  5. He finishes off by fluffing all the loops and cutting the dovetail pattern on all the tail ends.

 

Please join us on Mondays at 4:00 p.m. PST, 5:00 p.m. MST, 6:00 p.m. CST, and 7:00 p.m. EST each week for another fun Facebook live.

 

 DIY Summer Wreath and bows

Create DIY Summer Wreath and bows with Bowdabra

 

Did you miss any Facebook lives? You can find DIY decor bows and more at the Bowdabra blog!

Download FREE Bowdabra App

Leave a Reply

Your email address will not be published. Required fields are marked *

Bow Making Tools Payment Process
Bowdabra 100% Trusted Bow Maker Tools
Our Promise
to You
USPS Shipping - Bowdabra Bow Maker Tools
USPS Best Way
Shipping
Bowdabra Security - Best Bow Maker Tools & Bow Mega Kits
Secure
Information
By using our website, you consent to our use of cookies as described in our cookie policy. You can withdraw your consent at any time. Learn more