Easy DIY Fall Decor Bows and Wreaths

Do you love incorporating fall decor into your home to celebrate the fall season? If yes, look no further! Here are some easy fun DIY fall decor bows and wreaths. In the video below, Sandy Sandler, the creator of the Bowdabra is going to show you how to make easy yet beautiful DIY fall decor bows and wreaths that will make your home feel warm and cozy!

Watch this Facebook Live as Sandy Sandler, the creator of the Bowdabra teaches how to make gorgeous DIY Bow & Wreath Designs For this fall season in just a few minutes!

DIY Big Fall Bow (Starts at 1:14)

Materials required:

• 100-yard Bowdabra bow wire
• Large Bowdabra
• Fall Printed Ribbon Roll
• Burlap Ribbon Roll

DIY Big Fall Bow

Process:

1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra.
2. After cutting the dovetail pattern on the tail ends, she puts 3 quarters of both ribbons together in the Bowdabra.
3. She places both the ribbons in and creates big 8 loops on the Bowdabra.
4. Next, she places some fall decorative picks into the Bowdabra.
5. She secures the bow with several wire knots in the back and finishes off by fluffing the loops.

DIY Mini Flower Bow (Starts at 5:36)

Materials required:

• 100-yard Bowdabra bow wire
• Mini Bowdabra
• Red Ribbon Roll
• Green Ribbon Roll

Process:

1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra.
2. After cutting the little pieces (6” long tails) from the red and green ribbons, she cuts them in a pointed shape.
3. She places all these little pieces one by one (3 pieces of green ribbon, 4 pieces of red ribbon) into the Bowdabra.
4. She secures the bow with several wire knots in the back and finishes off by fluffing the loops.

Fall Decor Bow (Starts at 8:14)

Materials required:

• 100-yard Bowdabra bow wire
• Large Bowdabra
• Green Ribbon Roll
• Orange Plaid Ribbon Roll
• Burlap Ribbon Roll
• Orange Burlap Ribbon Roll
• Greenery Picks

Process:

1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra.
2. After cutting the dovetail pattern on the tail ends, she puts all the ribbon tails (8” long) into the Bowdabra in this order – Orange Plaid, Green, Burlap, Orange Burlap, Orange Plaid, Orange Burlap, Burlap, Orange Plaid ribbon.
3. She lays a few greenery picks on top of these ribbons and pulls the bow wire from one end to the other and ties the bow.

Big Deco Mesh Bow (Starts at 10:58)

Materials required: 

• 100-yard Bowdabra bow wire
• Large Bowdabra
• Green Deco Mesh
• Chicago Ribbon Roll
• Cute little ornaments

Big Deco Mesh Bow

Process:

1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra.
2. She scrunches the big green mesh into the Bowdabra, creates 2 loops, and cuts it off.
3. She places the Chicago ribbon in and creates 8 loops and 1 button loop.
4. Next, she puts some cute little ornaments and scrunches all these down with a Bowdabra wand.
5. She secures the bow with several wire knots in the back and finishes off by fluffing the loops.

Green Mesh & Red Bow (Starts at 15:51)

Materials required:

• 100-yard Bowdabra bow wire
• Large Bowdabra
• Red Ribbon Roll
• Green Deco Mesh
• Cute little ornaments

Green Mesh & Red Bow

Process:

1. Sandy cuts about 3 quarters of the yard and puts the mesh aside.
2. She folds the bow wire in half and tucks it underneath the Bowdabra.
3. She takes the mesh, scrunches it in and puts the red ribbon (5” wide) on top of it, and creates 6 loops.
4. In the end, she places a few little ornaments picks into the Bowdabra and secures the bow with several wire knots in the back.

DIY Fall Swag (Starts at 19:54)

Materials required:

• 100-yard Bowdabra bow wire
• Large Bowdabra
• Orange Burlap Ribbon Roll
• Plaid Ribbon Roll
• Green Ribbon Roll
• Fall picks – flower picks, rose picks, Pumpkin Picks

DIY Fall Swag

Process:

1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra.
2. She places some fall picks like fall flower/leaves picks, rose picks & pumpkin picks inside the Bowdabra.
3. She places the orange burlap, plaid, and green ribbon inside the Bowdabra.
4. After that, she places the plaid ribbon in and creates 3 loops.
5. She secures everything with several wire knots in the back and finishes off by fluffing the loops.
6. In the end, she places 3 little pumpkin picks, and candles beside this fall swag to create a centerpiece.

DIY Fall Bow Wreath (Starts at 23:47)

Materials required:

• 100-yard Bowdabra bow wire
• Mini Bowdabra
• Fall Leaves Picks, Green leaf pick
• Green Ribbon Scraps
• Burlap Ribbon Roll
• Deco Mesh Covered little Wreath

DIY Fall Bow Wreath

Process:

1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra.
2. She puts a few falls leaves picks into the Bowdabra.
3. She places 3 pieces of green ribbon scraps and one green leaf pick on top of it.
4. She finishes it off with 2 loops in the center with burlap ribbon.
5. She secures everything with several wire knots in the back and finishes off by fluffing the loops.
6. In the end, she ties this onto the deco mesh-covered little wreath.

Double Ribbon Bow (Starts at 26:00)

Materials required:

• 100-yard Bowdabra bow wire
• Large Bowdabra
• Chicago Ribbon Roll (3 yards)
• Red/Gold Fall Leaf Ribbon Roll

Process:

1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra.
2. She places both the ribbons together into the Bowdabra, creates 6 loops, and cuts it off.
3. She secures everything with several wire knots in the back and finishes off by fluffing the loops.

Please join us on Mondays at 4:00 p.m. PST, 5:00 p.m. MST, 6:00 p.m. CST, and 7:00 p.m. EST each week for another fun Facebook live.

Did you miss any Facebook lives? You can find DIY decor bows and more at the Bowdabra blog!