Archives

5 DIY Crafts – Easy Bow And Wreath Making Step-By-Step Tutorial

From handmade gifts to DIY decor, today we’re going to share a variety of craft tutorials. Here you’ll find a wide array of bow and wreath-making ideas. Get ready to be inspired for 5 festive DIY crafting. Learn how to make DIY crafts like bows and wreaths with Bowdabra in few minutes!

Watch Nick from Nick’s Seasonal Décor on Bowdabra Facebook Live, with funky and traditional bows, and a Bow wreath, teaching us the process from scratch. Tune in to learn just how to make these gorgeous bows that you can add to your Wreaths or any décor!

 

 

Dog Ribbon Traditional Bow (Starts at 2:05)

Materials required:

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the dog ribbon roll, he places them right into the Bowdabra.
  3. He creates 9 loops on the Bowdabra to give it a traditional bow design.
  4. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

Dog Ribbon Funky Bow (Starts at 7:21)

Materials required:

 

funky bow

Dog Ribbon Funky Bow

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the dog ribbon roll, he places them right into the Bowdabra.
  3. He creates one loop (3½”-4”), two tails (6″-8”) cuts it off and places it right into the Bowdabra.
  4. In the same fashion, he creates more 4 loops with the same ribbon.
  5. To secure the bow, he pulls the bow wire from one end to the other and makes slip knots.
  6. He finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

Patriotic Bow (Starts at 12:11)

Materials required:

 

patriotic bow

Patriotic Bow

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the red Plaid Wired Ribbon Roll, he places them right into the Bowdabra.
  3. He takes the red ribbon, creates 3 loops on the Bowdabra, and snips it off.
  4. He cuts another length of blue plaid ribbon and places them right into the Bowdabra.
  5. Then he creates 3 loops on the Bowdabra and snips it off.
  6. Next, he picks up the red ribbon creates a button loop on the Bowdabra.
  7. To secure the bow, he pulls the bow wire from one end to the other and makes slip knots.
  8. He finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

Two-Ribbon Funky Bow (Starts at 16:30)

Materials required:

 

Two-Ribbon Bow

Two-Ribbon Funky  Bow

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. He creates 1 loop with the 2 ½ Pink Ribbon Roll, cuts it off, and places it right into the Bowdabra
  3. He places the 1 ½ Pink gingham Ribbon on the Bowdabra, creates 1 loop, and snips it off.
  4. Next, he takes the 2 ½ Pink Ribbon, creates 1 loop, cuts it off, and places it right into the Bowdabra
  5. Again he creates 1 loop with the 1 ½ Pink gingham Ribbon, cuts it off, and places it right into the Bowdabra.
  6. To secure the bow, he pulls the bow wire from one end to the other and makes slip knots.
  7. He finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

Traditional Bow Wreath (Starts at 19:42)

Materials required:

 

 Wreath

Traditional Bow Wreath

 

Process:

  1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
  2. After cutting off the tails from the burlap ribbon roll, he places them right into the Bowdabra.
  3. He creates 7 loops (4 ½ -5”) on the Bowdabra to give it a traditional bow design.
  4. Then, he secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.
  5. He sticks the bow securely to the wreath.
  6. He takes 2 little lengths of the burlap wraps them around and staples (using a staple gun) them with two cable ties on the back of the signboard.
  7. Next, he attaches the signboard with the wreath.
  8. In the end, he sticks some greenery decorative picks and red roses to the wreath with hot glue.

 

Please join us on Mondays at 4:00 p.m. PST, 5:00 p.m. MST, 6:00 p.m. CST, and 7:00 p.m. EST each week for another fun Facebook live.

 

5 DIY Crafts – Easy Bow And Wreath Making Tutorial

5 DIY Crafts – Easy Bow And Wreath Making Tutorial

 

Did you miss any Facebook lives? You can find DIY decor bows and more at the Bowdabra blog!

Download FREE Bowdabra App

Leave a Reply

Your email address will not be published. Required fields are marked *

Bow Making Tools Payment Process
Bowdabra 100% Trusted Bow Maker Tools
Our Promise
to You
USPS Shipping - Bowdabra Bow Maker Tools
USPS Best Way
Shipping
Bowdabra Security - Best Bow Maker Tools & Bow Mega Kits
Secure
Information
By using our website, you consent to our use of cookies as described in our cookie policy. You can withdraw your consent at any time. Learn more